Question: How do you install a vanity drain pipe?

How do you install a new bathroom sink drain pipe?

1:174:50How to Plumb a Drain - Sink Drain Pipes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSuggested clip · 56 secondsNow at a washer making sure the taper is toward the end then fit into the marble connector looselyMoreNow at a washer making sure the taper is toward the end then fit into the marble connector loosely without tightening the nut. Next attach the p-trap to the trap arm loosely.

How high should a vanity drain line be?

The drain line for the bathroom sink should be centered inside the vanity cabinet. It can be placed between 18 and 24 inches off the floor. The height varies a little according to the vanity size; taller vanities need higher supply and drain lines, while lower ones shift the line placement down.

How do you hook up a drain pipe?

0:322:04How To Connect Drain Pipe to Existing Drain, by Apple - YouTubeYouTubeStart of suggested clipEnd of suggested clipSuggested clip · 56 secondsCut the pipe. Make sure that you cut all the way. Through. Do the same on the other. Side. And snapMoreCut the pipe. Make sure that you cut all the way. Through. Do the same on the other. Side. And snap your tea in place corrugated pipe can be pushed back and forth because its a little bit springy.

Can I use silicone instead of plumbers putty?

Both plumbers putty and silicone are sealing compounds designed to provide a water tight fit for pop up drains, sink strainers, undersides of fittings, showers and drains. Plumbers putty is more traditional while silicone caulking is a more modern product, but either one (in most cases) can get the job done.

When installing a drain line how many inches should the drain line be installed off the floor?

Your plumbing codes might require the horizontal revent lines be as high as 54 inches above the finished floor, or at least 6 inches above the fixture flood level (the point where water will start to spill out).

What is a standard vanity height?

30 to 32 inches Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches. For reference, thats the standard counter height for kitchens.

What is the standard height of a bathroom medicine cabinet?

Standard Height The installation height for medicine cabinets is generally accepted to be 64 inches from the floor to the mirrors center, according to Broan.

What are the standard sizes for bathroom vanities?

Standard widths for vanity cabinets are 24, 30, 36, 48, 60 and 72, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20-21. However,there are narrow depth options available which are usually 18”.

Write us

Find us at the office

Kortz- Clang street no. 12, 89735 Prague, Czech Republic

Give us a ring

Alexie Halama
+68 599 734 157
Mon - Fri, 8:00-19:00

Say hello