Question: How do you tell the date on tires?

To determine the age of your tires, check the last four digits of the U.S. The U.S. Department of Transportation (DOT) number stamped on the tires sidewall contains a date code that identifies the age of your tires.

How do you check the expiry date on a tire?

Its typically a 10- or 11-character DOT (Department of Transportation) code, near the DOT stamp, embossed on the sidewall of the tire. Check the last four digits. The last two refer to the year the tire was manufactured, the first two (of the four) represent the week number.

Is there a manufacture date on tires?

Every tire has a birth date—the day it was manufactured—and an expiration date that is six years from that manufacture date. Most automobile manufacturers warn drivers to replace vehicle tires after six years. However, tires manufactured before the year 2000 have a 10-character code.

Do car Tyres have a use by date?

Do tyres have expiry dates? Tyres dont last forever, and old tyres can be a serious safety risk. As tyres age, cracks may form beneath the surface, causing the tyre to fail under load. If you havent done so recently, it could be time to check how old the tyres on your vehicle are, and if they need replacing.

Where is the manufacture date on Cooper tires?

In order to find the week and year of production for tires manufactured after the year 1999, look at the last four numbers of the TIN. It will identify the week and year in which the tire was manufactured. The first two numbers identify the week and the last two numbers identify the year of manufacture.

Do tyres have a use by date?

Do tyres have expiry dates? Tyres dont last forever, and old tyres can be a serious safety risk. As tyres age, cracks may form beneath the surface, causing the tyre to fail under load. If you havent done so recently, it could be time to check how old the tyres on your vehicle are, and if they need replacing.

How do you read a date code on a Cooper tire?

Think of a tires identification number as its “birthday.” The first two digits are the factory code indicating where the tire was made. The last four digits identify the week and year of manufacture (Example: “0309” means third week of the year 2009), so drivers can know exactly when their tires were manufactured.

How do you read a DOT tire date code?

Remember that the last four digits of the code are the date the tire was manufactured. You can check the first two digits of the DOT code to know the week of the manufacturing. The last two digits will reveal the manufacturing year. For instance, when it was written in 0203, the manufacturing year was 2003.

What are three warning signs of tire failure?

Trouble signs to look forCracking or cuts in the sidewalls.Uneven tread wear. Excessively worn tread. Alternatively, you can use a Lincoln-head penny as a tread-wear indicator. Bulges or blisters. Excessive vibration.3 Jun 2015

How do you tell if you need new tires with a quarter?

0:000:22How Worn Are Your Tires? The Quarter Test Will Tell You - YouTubeYouTube

When replacing only 2 tires where should they go?

When tires are replaced in pairs, the new tires should always be installed on the rear axle, and the partially worn tires should be moved to the front.

Should new tires be in front or back?

According to Tire Review, new tires should always go in the back. Rear tires provide the vehicle stability, and if they have little tread, then stability is lost.

Write us

Find us at the office

Kortz- Clang street no. 12, 89735 Prague, Czech Republic

Give us a ring

Alexie Halama
+68 599 734 157
Mon - Fri, 8:00-19:00

Say hello